The Grove IoT Commercial Gateway Kit from Seeed is the result of a partnership between Microsoft and Intel to create a starter kit for rapidly prototyping commercial IoT gateways. This kit finally makes it easy to setup and create Azure IoT Gateways with the Gateway SDK on a physical device. And, it’s powered by an Intel NUC and Wind River Linux.
Grove IoT Commercial Gateway Kit Overview
Here’s a brief overview of the features of this kit:
- Azure IoT Gateway & Azure IoT device SDK supported
- Intel NUC Kit DE3815TYKE
- 802.11 ac Wifi enabled
- Bluetooth enabled
- Plug-n-play Grove system
- Runs Wind River Linux
Purchase for ~$299 USD from Seeed
Intel NUC Kit Overview
The Intel NUC (Next Unit of Computing) is a next generation, more compact computing device. It’s a complete desktop computer packed into a small package that has a chassis size of 7.47″ x 4.56″ x 1.57″. It also features an Intel Atom CPU / Processor and supports up to 8GB RAM / Memory.
Here’s the full specifications of the Intel NUC Kit DE3815TYKE that comes with this Grove IoT Commercial Gateway Kit:
- CPU: Intel Atom E3815 (512KB Cache, 1.46 Ghz)
- Graphics: Intel HD Graphics (up to 400 Mhz)
- Storage: Built-in 4 GB eMMC device with Supports internal 2.5″ HDD or SSD
- Memory: Up to 8 GB DDR3L (1333/1600 Mhz) via SO-DIMM slot-half-length min PCIe slot
- Wireless: Intel Dual Band Wireless AC 7260 Plus Bluetooth, 802.11ac, 2×2, Bluetooth 4.0, PCIe, USB, HMC
- External: USB 3.0, Five USB 2.0 (2 back, 3 internal), HDMI, Headphone/microphone jack, Gigabit LAN
Here’s a link to a documentation article that will guide you through setting up the Grove IoT Commercial Gateway Kit as an Azure IoT Gateway:
Set up Intel NUC as an IoT gateway
Full Parts List
Here’s the list of all the parts and contents of the Grove IoT Commercial Gateway Kit:
- 1x Intel NUC Kit DE3815TYKE with 4G Memory and Bluetooth expansion card
- 1x Grove Base Shield v2 (compatible with Arduino boards*, same pinout as Arduino Uno R3)
- Grove Plug-n-play Sensors:
- 1x Button
- 1x Sound Sensor v1.2
- 1x Touch
- 1x Light Sensor v1.2
- 1x Temperature Sensor v1.1
- 1x Rotary Angle Sensor(P)
- 1x Piezo Vibration Sensor
- Grove Plug-n-play Actuators:
- 1x LCD RGB Backlight
- 1x Buzzer
- 1x Red LED
- 1x Green LED
- 1x Blue LED
- 1x Gear Stepper Motor with Driver
- Other:
- 14x 26AWG Grove Cable
- 1x B to A Type USB Cable (0.5m)
* NOTE: This kit does NOT include the Arduino / Genuine 101, or Texas Instrument Sensor Tag.